|
|
 |
Home | FAQ | Vendors | Packaging | MSDS | About Us | Contact Us |  |
|
|||||
How do I remove Speed-Sew while it is still wet? Speed-Sew may be removed with water if wet.
How do I remove Speed-Sew after it has dried? Speed-Sew can be removed by using perchlorethylene. Perchlorethylene is normally obtained through your local dry cleaner.
We have also heard that Speed-Sew can be removed using Canola oil & butter.
A product called called Stain Devils Spot Remover also helps remove Speed-Sew. It contains Olefin, Polypropylene, and Polyolefin.
"The best thing we have found to remove any of the tape or speed sew is Zo-Eze (it is a adhesive remover) and will not leave behind the goooie tacky feeling that other adhesive removers do. (such as goo gone or others you buy at the store). The only place we have found it happens to be from vendors or pet distributors, not at your local stores."
"Strip Ease is the solvent I prefer for glue removal.
Are there other uses for Speed-Sew? Please read our testimonials as uses vary greatly from training dog’s ears to mailing key’s or objects to creating anti skid on surfaces. If you have found a unique use for Speed-Sew ....let us know.
What fabrics does Speed-Sew work on?
How do I brace puppy ears? http://www.echowyn.com/Ears.html
What is the best procedure to speed-sew a Sheltie puppy's ears tipped and then how do you take it off without hurting the dog? Boy, it is so much easier to show someone than try and explain, but let me see...
first it depends on if the sheltie is a puppy, young adult, or older adult.
with puppies, around the age of 8wks we start bracing ears on top of the head to help with a good ear set. we pull the two ears together and place a small dab of speed sew on the fur between the two ears. this brings the ears to the top of the head and will help hold or create a good ear set.
as the puppies continue to grow the ears do all kinds of funny things especially while teething. some will tip low, and look like hound ears, others will just stay pricked and not tip at all. for those that do not tip, several breeder will do this several different ways. I use either the ear tape or mole skin in the ear (you must make sure the ear is cleaned with alcohol first) one either little piece of this is attached to the inside of the ear, I use a small amount of speed sew on the tip to bend over and glue to the tape or mole skin. In several cases this must continue to be done during the teething process (otherwise who knows what the ears will look like). Others, just us a small amount of speed sew and attach it to the fur towards the bottom of the ear.
the best thing we have found to remove any of the tape or speed sew is Zo-Eze (it is a adhesive remover) and will not leave behind the goooie tacky feeling that other adhesive removers do. (such as goo gone or others you buy at the store). The only place we have found it happens to be from vendors or pet distributors, not at your local stores.
|
Speed-Sew® is available at...
Get Speed-Sew® at most major retailers across Canada including independent local retailers. If your favorite store does not carry Speed-Sew® please let us know.
Where can I buy Speed Sew in the United States? Speed-Sew is only available online in the USA you can go to: |
||||
 |
 |
| © 2005 Universal Enterprises. All rights reserved. Questions? Comments? Please email us at info@speedsew.com. Created by SterlingKlor Communications |
|
 |
 |
